iScanVision Program for Setup and Monitoring of PTX SV Type Scanner/Verifier Products P/N 002-8151 Rev E
82. BAR CODE ANALYSIS RESULTS for a PREVIOUS BAR CODE This is an example of reviewing a bar code other than the last one processed as described in se
9Reflectance Profile Screen This screen displays a reflectance profile for SV unit’s entire scan path. An example is shown in Figure 3 below. Figure
10 SV SCANNER/VERIFIER SETUP PROCEDURE Installation of an SV scanner/verifier requires proper mounting position, port configuration(s) and LED config
1118. Move the code to the farthest position towards the right end of the laser beam where the code is intended to be scanned. 19. Similar to steps
12SCANNER POSITIONING Each SV100 has an attached label that indicates the type of scanner, focus distance and recommended scan angle. Use the scan di
iiTable of Contents INTRODUCTION ...
1 Copyrights The copyrights in this manual are owned by PTX. All rights are reserved Unauthorized reproducti
2INTRODUCTION ScanVision is designed to be a tool used for system setup and real-time bar code monitoring of an PTX SV type scanner/verifier. It is a
3PC Communication Port Setup Plug the supplied null-modem serial cable into the PC and into the SV unit. The PC communication port settings must ma
4Select Symbologies This item allows the user to program the SV unit to enable/disable individual symbology decoders. This is useful for either more
5 Support Menu This menu provides special diagnostic displays and a Comm port feature that are intended to be used only while working with PTX Techni
6Report an Analysis Reports a new analysis of any bar code(s) currently in the SV unit’s beam path. This is most useful in setup where scan distanc
7 Reflectance Profile Mode This mode gathers and displays a scan reflectance profile for the entire scan path. The profile is displayed with the Refl
Comentários a estes Manuais