Printronix P5000 Manual de Instruções descarregar pdf (Página 18)

Chapter 1 Controls and Indicators

Controls and Indicators

Electrical Controls and Indicators, Cabinet Models (Figure 2)

Switch or

Indicator

Function

Active

On-line

Active

Off-line

Power Switch Turns printer on and off: 1 = on, 0 = off. This switch is also a circuit breaker.

Status

Indicator

On when the printer is on-line, off when the printer is off-line. Flashes to indicate a

fault or warning.

ää

LCD Liquid Crystal Display. Displays printer status messages, fault messages, and

menus which permit user to set various configurations.

ää

ON LINE/

CLEAR

Toggles the printer on-line and off-line. Clears the printer after a fault is corrected

and returns the printer to off-line state.

ää

PAPER

ADVANCE

Prints any data in the buffer then moves paper up one line at the currently active

line spacing. If pressed longer than 1/2 second, moves paper to the next Top Of

Form as defined by the currently active form length.

ää

VIEW /

EJECT

Moves the current print position to the tractor area for viewing. When paper is in

VIEW position, “Printer in View” displays and microstep adjustment feature is

active. (See UP and DOWN keys.) Holding key down for more than 1/2 second

invokes EJECT and paper is advanced two pages. (EJECT can be disabled via

the menus.) Pressing key a second time moves paper back to the print position

from either VIEW or EJECT position.

ää

CANCEL Clears all data from the print buffer (if enabled in the MAINT/MISC menu).

= (UP)

Displays next higher level of a configuration menu. In VIEW mode, moves paper

up 1/72 inch. (See VIEW / EJECT key.)

ää

> (DOWN)

Displays next lower level of a configuration menu. In VIEW mode, moves paper

down 1/72 inch. (See VIEW / EJECT key.)

ää

< (NEXT)

Displays the next option in a configuration menu.

; (PREV)

Displays the previous option in a configuration menu.

SET TOF Moves paper downward from TOF alignment mark to the print station and sets this

as the first line of print on a page, independent of forms length. If there are data in

the buffers, the printer slews to the page position where printing left off and prints

the data.

PRT CONFIG Prints the current printer configuration.

JOB SELECT Allows fast selection of any stored configuration. Repeated pressing scrolls

through all saved configurations. Press ENTER to select the displayed

configuration. (ENTER does not have to be unlocked for this function.)

ENTER Enters an option displayed on the LCD into printer non-volatile memory. Starts and

stops printer tests, sets a value, or prints the configuration. This key is locked and

unlocked by a user-selectable key combination. (Refer to the

User’s Manual

;+<

Resets the printer by reloading the power-up configuration and resetting the

internal state.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 359 360

Comentários a estes Manuais

Sem comentários

Printronix P5000 Manual de Instruções Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Printronix P5000